low profile version of our signal sentry series. available with sleeve or block inductors and optional grounded shielding. grounded shielding allows connection to grounded cables for additional rfi protection. specifications contacts material: phosphor bronze plating: 50 microinches gold barrier underplating: 100 microinches nickel resistance: initial: 20 milliohms maximum after durability testing (500 mating cycles): 30 milliohms maximum pcb terminals solderability 60/40 ferrites type: high resistivity, nickel zinc ceramic sleeves: single-aperature cylinders block: multi-aperature rectangular prism shield material solder-plated phosphor bronze housing material black glass-filled polyester (valox 457) dielectric withstanding voltage line-to-line and line-to-ground 1000vac for 60 seconds printed circuit board retention before soldering: 1 lb. minimum after soldering: 20 lb. minimum n series libertyville, il (847) 680-7400 pricing consult your local corcom sales representative for pricing. part no. part no. rj11-6n-b rj45-8n-b rj11-6n-s rj45-8n-s rj11-6n3-b rj45-8n3-b rj11-6n3-s rj45-8n3-s rj11-6n4-b rj45-8n4-b rj11-6n4-s rj45-8n4-s ferrite block ferrite sleeve impedance in ohms n 128 typical impedance in ohms frequency mhz ul recognized csa certified model dimensions and pc board layout on pages 131 to 133. .com .com .com .com 4 .com u datasheet
|